AirClean AC4000S Polypropylene Ductless Fume Hood Workstation

Description

AirClean™ Systems Identification Workstation Series Ductless Fume Hood With Polypropylene Base Cabinet - Model AC4000S
The Airclean Identification Workstation Series Ductless Fume Hood helps protect operator from toxic gases such as methanol, xylene and acetone, residual cyanoacrylate and carbon-based powders used in routine forensic analysis.
Description
Available in two-speed controller model or with AirSafe™ controller
AirSafe controller automatically monitors and displays airflow face velocity on alphanumeric display and detects when to change bonded carbon and HEPA filters
Two-speed model
Lower sash is outfitted with electromagnetic controller that senses when sash is lifted
When sash is raised, blower increases velocity to compensate for additional opening
Structural polypropylene
Horizontal baffles promotes airflow pattern throughout hood
High-capacity bonded carbon filter for common forensic chemicals
HEPA filter removes powders at 99.997% efficiency at 0.3 microns
Easily cleaned to prevent cross-contamination between cases and evidence
30 w integral fluorescent light
Adequate workspace to allow for superglue tank to be placed inside
All units operate from standard 110V or 220V electrical outlet
Optional clear back panel, sides, hanging bar and clips available
Compliance
Meet and exceed OSHA and ANSI Z9.5 standards and guidelines.
AirSafe
®
Automatic Safety Controller
AirSafe provides superior airflow control and monitoring with integrated solid state electronic gas detection.
AirSafe provides a simple-to-use interface combined with powerful airflow control, filtration monitoring and gas detection capabilities. A proprietary sensor is used to accurately monitor and display face velocity on the LCD display. Blowers can be controlled manually or in 'automatic' mode, where AirSafe automatically controls blower speed in order to maintain a user-set face velocity. A solid-state hydrocarbon gas detector is linked to the controller for monitoring filtration breakthrough. Audible and visible alarms alert the user in the event of low airflow or required filter replacement.
Features
Airflow Monitoring
- constantly monitors airflow and displays the actual instantaneous face velocity on an alphanumeric display. The controller uses a special sensor developed by AirClean Systems which, unlike traditional anemometers, poses no safety threat to the operator.
Automatic/Manual Setting
- In automatic mode the unit is set to maintain a constant face velocity. In manual mode the face velocity is controlled by the operator.
Airflow Alarm
- A low airflow alarm may be set and displayed. An audible and visible alarm alerts the user if there is insufficient airflow.
Gas Detection/Filter Monitor
- A solid state electronic gas detector warns the user of filter breakthrough.
Timer
- A digital countdown lab event timer may be preset by the operator and used to time general lab functions.
Chemical Pump
- An optional chemical transfer pump may be directly controlled by pressing the quick key button.
AUX Control
- Any 110V 10 amp or 220V 5 amp device may be connected and powered on and off via the safety controller. This is particularly useful for switched outlets or transfer devices (requires configuration at purchase).
Quick Keys
Quick Key operation is designed to easily activate and control routine functions.